Start with the divergence test: if the terms don't approach 0, the series diverges. Otherwise, match the series to its form — geometric (|r| < 1), p-series (p > 1), alternating (alternating series test), factorials or exponentials (ratio test), nth powers (root test), rational expressions (limit comparison with a p-series), and easy-to-integrate terms (integral test).
Loading the interactive test picker… The decision table below gives the same answers.
The decision table
| If the series looks like… | Use | Converges when |
|---|---|---|
| Terms don't go to 0 | Divergence test | Never — it diverges |
| a·rn | Geometric series | |r| < 1 (sum = a/(1−r)) |
| 1/np | p-series | p > 1 |
| Signs alternate | Alternating series test | |an| decreases to 0 |
| Factorials, 3n, nn | Ratio test | lim |an+1/an| < 1 |
| Whole term to the nth power | Root test | lim n√|an| < 1 |
| Fraction of polynomials or roots | Limit comparison | Same as the matching p-series |
| Positive, decreasing, integrable f(n) | Integral test | ∫ f(x) dx converges |
| Nothing above fits | Direct comparison | Smaller than a convergent series |
The order to try tests
- Divergence test first, always. It takes ten seconds and ends the problem whenever the terms don't shrink to zero.
- Recognise the named families. Geometric and p-series are answered instantly by their rules — no calculation needed.
- Check for alternating signs. If they alternate, the alternating series test usually settles convergence; then check absolute convergence separately.
- Read the term's growth type. Factorials and exponentials point to the ratio test; an expression raised to the nth power points to the root test.
- Fall back to comparison. Rational and algebraic terms behave like the p-series you get by keeping only the highest powers.
Each test, with a worked example
Divergence (nth-term) test
The terms approach 1, not 0, so the series diverges. The test only works in one direction: terms going to 0 never proves convergence on its own.
Geometric series
|r| = 2/3 < 1, so it converges — and it's one of the few series where you can find the exact sum.
p-series
Σ 1/n² converges because p = 2 > 1 (its sum is π²/6). Σ 1/√n diverges because p = ½ ≤ 1. The harmonic series Σ 1/n, with p = 1, is the famous borderline case — it diverges.
Ratio test
L < 1, so it converges. The ratio test shines with factorials: for Σ n!/nn, the ratio tends to 1/e < 1.
Root test
Taking the nth root cancels the nth power cleanly, leaving L = ½ < 1, so it converges.
Limit comparison test
The limit is finite and positive, so both series behave the same way — and since Σ 1/n diverges, this one diverges too. To pick the comparison series, keep only the highest power of n on top and bottom.
Integral test
For Σ 1/(n ln n) starting at n = 2, the function is positive and decreasing, and ∫ dx/(x ln x) = ln(ln x), which grows without bound. So the series diverges. Integrals like this are covered in improper integrals.
Direct comparison test
Σ 1/(n² + 1) is term-by-term smaller than Σ 1/n², which converges, so it converges too. The inequality must point the right way: being smaller than a divergent series tells you nothing.
Absolute vs conditional convergence
For series with negative terms, there are two kinds of convergence. If Σ|an| converges, the series converges absolutely. If Σ an converges but Σ|an| doesn't, it converges conditionally.
The standard example is the alternating harmonic series Σ (−1)n+1/n. It converges (to ln 2) by the alternating series test, but Σ 1/n diverges — so the convergence is conditional. Questions that say "classify" want one of three answers: absolutely convergent, conditionally convergent, or divergent.
Common mistakes
- Using the divergence test to prove convergence. Terms going to 0 is necessary, not sufficient. Σ 1/n is the counterexample that catches everyone.
- Trusting a ratio test result of L = 1. It's inconclusive — and it happens for every p-series and nearly every rational expression. Switch to comparison.
- Pointing the comparison the wrong way. Smaller than convergent proves convergence; bigger than divergent proves divergence. The other two combinations prove nothing.
- Forgetting the integral test's conditions. The function must be positive, continuous, and decreasing — at least eventually.
- Stopping after the alternating series test when the question asks you to classify. You still need to check absolute convergence.
Practice problems
Decide whether each converges, and name the test. Tap to reveal.
- Σn=1∞ 3/2n
Show answer
Converges — geometric with r = 1/2; the sum is 3
- Σ n²/(n²+1)
Show answer
Diverges — divergence test; the terms approach 1
- Σ 1/n1.5
Show answer
Converges — p-series with p = 1.5 > 1
- Σ (−1)n/√n
Show answer
Converges conditionally — alternating series test, but Σ 1/√n diverges
- Σ 5n/n!
Show answer
Converges — ratio test gives L = 0
- Σ (n+1)/(n³+4)
Show answer
Converges — limit comparison with 1/n² gives limit 1
Questions students ask
Can more than one test work on the same series?
Often, yes. Σ n/2n yields to both the ratio and root tests. Any valid test gives a correct answer; the decision table just points you to the one that's usually quickest.
What do I do if the ratio test gives exactly 1?
Abandon it — it's inconclusive. Try limit comparison with a p-series, which handles most of the series that make the ratio test fail.
Can I just compute the sum instead of using a test?
Most series can't be summed exactly, which is why convergence tests exist. Geometric and telescoping series are the main exceptions where you can find the actual sum.
Still not sure which test fits?
Scan the series with Aheadia and see which test applies and why — every step checked by a math engine.
Download free on iOS